Our Euipment
MATSUURA MX-330
3 machines, 24/7
Type : 5 axes
Working dimensions max :
Ø330×H320 (mm)
Ø12.99×H12.60 (in)
MATSUURA VX-1000
3 machines, 24 /7
Type : 3 axes
Working dimension max (x,y,z):
1020 x 610 x 610 (mm)
40.15 x 24.01 x 24.01 (in)
MATSUURA MX-850 , MX-520
3 machines, 24/7
Type: 5 axes
Working dimension max :
Ø760×H450 (mm)
Ø29.92×H17.71 (in)
Turning
MAZAK, INTEGREX 200S
4 machines, 24/7
Type : Advanced Multi-Tasking machine (full 5 axes)
Dimensions d'usinage max :
Ø330×L996 (mm)
Ø12.99×L39.21 (in)
NAKAMURA WT-100
1 machine, 24/7
Type : 4-axes
Working dimensions max :
Ø190xL503 (mm)
Ø7.5×L20 (in)
MAZAK QTS100
1 machine, 24/7
Type : 3-axes
Working dimensions max :
Ø56xL300 (mm)
Ø2.2×L11.8 (in)
Conventional machining
Conventional machining
4 conventional millings
Working space: 660mm x 400mm x 400mm
FABMASTER
Guillotine shears
2500 mm wide
COBRA 350 AX
Automatic saw
Small precision lathes
We have 3 small precision lathes
max swing : 250 mm x 600 mm
FREEPORT
Surface grinder
250 mm x 500 mm
CYCLONE
Sand blast
FABMASTER
Press brake
1825 mm wide
BEHRINGER saw
Horizontal saw
Anodisation and Surface treatments
MIL-A-8625 is the military specification titled Anodic Coatings for Aluminium and Aluminium Alloys.
MIL-A-8625 is approved for use by all Departments and Agencies of the Department of Defence.
MIL-A-8625, Type II, Class 1 Sulphuric acid anodizing, conventional coatings produced from a sulphuric acid bath, Non-dyed
MIL-A-8625, Type II, Class 2 Sulphuric acid anodizing, conventional coatings produced from a sulphuric acid bath, Dyed
MIL-A-8625, Type III, Class 1 Hard Anodic Coatings, Non-dyed
MIL-A-8625, Type III, Class 2 Hard Anodic Coatings, Dyed
The chemical conversion coating types :
MIL-DTL-5541F (MIL-C-5541E), TYPE 1,Class 1A*
MIL-DTL-5541F (MIL-C-5541E), TYPE 1,Class 3 **
MIL-DTL-5541F (MIL-C-5541E), TYPE 2,Class 1A (ROHS)
MIL-DTL-5541F (MIL-C-5541E), TYPE 2,Class 3 (ROHS)
Clear Chromate per ASTM B449-93, Class III
* Class 1A : for maximum protection against corrosion, for surfaces to be painted or left unpainted
** Class 3 : for protection against corrosion where low electrical resistance is required
Inspection and reports
CMM Zeiss Contura G2
When it comes to quality, we allow no compromise. This CMM features an articulated Vast XXT head capable of both probing and scanning for maximum flexibility. We use that CMM mainly for inspection report. Best-in-class ZEISS RDS articulating probe holder that can reach 20,376 positions in 2.5º increments. Can evaluate geometric tolerancing with a acuracy of 2 microns.
Mitutoyo QM-Measure
This device allows us to take measurement in very little time, making it perfect for in process inspection.
Ability of the device:
Error = (3 +4 L/1000) microns
ZEISS, CMM Spectrum II
This CMM is very similar to Contura, except that it is smaller and it does not allow the "scanning".
Mitutoyo Quick Vision
For shapes too small to be measured with a stylus, this optical CMM takes three dimensional measurements without touching the part. Please watch this animation to see the benefits of this system. Ability of the device :
5 microns volumetric measurement (X-Y-Z)
Get a Quote | About Us | Services | Equipment | Quality